ZyXEL Communications ZyWall ATP series User Manual page 376

Figure 263 Configuration > Network > DNS Inbound LB > Add/Edit > Add
The following table describes the labels in this screen.
Table 152 Configuration > Network > DNS Inbound LB > Add/Edit > Add/Edit
LABEL DESCRIPTION
Member The Zyxel Device checks each member interface's loading in the order displayed here.
Monitor Interface Select an interface to associate it with the DNS load balancing rule. This field also displays
whether the IP address is a static IP address (Static), dynamically assigned (Dynamic) or
obtained from a DHCP server (DHCP Client), as well as the IP address and subnet mask.
Weight This field is available if you selected Weighted Round Robin for the load balancing
algorithm.
Specify the weight of the member interface. An interface with a larger weight gets more
chances to transmit traffic than an interface with a smaller weight.
IP Address
Same as Monitor Select this to send the IP address displayed in the Monitor Interface field to the DNS query
Interface senders.
Custom Select this and enter another IP address to send to the DNS query senders.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving.
Chapter 18 DNS Inbound LB
ZyWALL ATP Series User's Guide
376