ZyXEL Communications ZyWall ATP series User Manual page 345

The following table describes the labels in this screen.
Table 140 Network > Redirect Service > Edit
LABEL DESCRIPTION
Enable Use this option to turn the Redirect Service rule on or off.
Service Select the service to be redirected: HTTP Redirect or SMTP redirect.
Name Enter a name to identify this rule. You may use 1-31 alphanumeric characters,
underscores(
is case-sensitive.
Criteria
User Select the user account or user group name to which this rule is applied.
Interface Select the interface on which the request must be received for the Zyxel Device to
forward it to the specified server.
Source Address Select the name of the source IP address object from which the traffic should be
sent. Select any for the rule to be effective for every source.
Redirect Settings
Server Enter the IP address of the HTTP proxy or SMTP server.
Port Enter the port number that the HTTP proxy or SMTP server uses.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving.
Chapter 13 Redirect Service
), or dashes (-), but the first character cannot be a number. This value
_
ZyWALL ATP Series User's Guide
345