ZyXEL Communications ZyWall ATP series User Manual page 588

Figure 380 Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See
information as well.
Table 237 Configuration > Object > User/Group > Group
LABEL
Add
Edit
Remove
References
#
Group Name
Description
Member
Reference
34.2.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To access this
screen, go to the Group screen (see
Edit icon.
Figure 381 Configuration > Object > User/Group > Group > Add
Chapter 34 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so. Removing a group does not remove the user accounts in the group.
Select an entry and click References to open a screen that shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific user group.
This field displays the name of each user group.
This field displays the description for each user group.
This field lists the members in the user group. Each member is separated by a comma.
This displays the number of times an object reference is used in a profile.
Section 34.2.3 on page
ZyWALL ATP Series User's Guide
Section 34.2.3.1 on page 588
587), and click either the Add icon or an
588
for more