ZyXEL Communications ZyWall ATP series User Manual page 125

Table 31 Monitor > System Status > Session Monitor (continued)
LABEL DESCRIPTION
The User, Service, Source Address, Destination Address, Source Country and Destination
Country fields display if you view all sessions. Select your desired filter criteria and click the
Refresh button to filter the list of sessions.
User This field displays when View is set to all sessions. Type the user whose sessions you want to view.
It is not possible to type part of the user name or use wildcards in this field; you must enter the
whole user name.
Service This field displays when View is set to all sessions. Select the service or service group whose
sessions you want to view. The Zyxel Device identifies the service by comparing the protocol
and destination port of each packet to the protocol and port of each services that is defined.
Source This field displays when View is set to all sessions. Type the source IP address whose sessions you
Address
want to view. You cannot include the source port.
Source This field displays when View is set to all sessions. Select the country where the traffic is coming
Country
from.
Destination This field displays when View is set to all sessions. Type the destination IP address whose sessions
Address
you want to view. You cannot include the destination port.
Destination This field displays when View is set to all sessions. Select the country where the traffic is going to.
Country
Search Click this to display all sessions in the table below according to the criteria you defined above.
Clear Administrators can use these buttons to forcibly terminate selected TCP/UDP connections.
Select one or multiple connections and then click Clear; click Clear All to terminate all
Clear All
connections displayed. Cleared sessions display in the Log > View Log screen.
# This field is the rank of each record. The names are sorted by the name of user in active session.
You can use the pull down menu on the right to choose sorting method.
User This field displays the user in each active session.
If you are looking at the sessions by users (or all sessions) report, click + or - to display or hide
details about a user's sessions.
Service This field displays the protocol used in each active session.
If you are looking at the sessions by services report, click + or - to display or hide details about
a protocol's sessions.
Source This field displays the source IP address and port in each active session.
If you are looking at the sessions by source IP report, click + or - to display or hide details about
a source IP address's sessions.
Source This field displays the source country in each active session.
Country
Destination This field displays the destination IP address and port in each active session.
If you are looking at the sessions by destination IP report, click + or - to display or hide details
about a destination IP address's sessions.
Destination This field displays the destination country in each active session.
Country
Rx This field displays the amount of information received by the source in the active session.
Tx This field displays the amount of information transmitted by the source in the active session.
Duration This field displays the length of the active session in seconds.
Chapter 6 Monitor
ZyWALL ATP Series User's Guide
125