ZyXEL Communications ZyWall ATP series User Manual page 679

Figure 448 Configuration > Device HA > Device HA Pro
The following table describes the labels in this screen.
Table 295 Configuration > Device HA > Device HA Pro
LABEL
Enable Device HA
Enable Configuration
Provisioning From Active
Device.
Serial Number of Licensed
Device for License
Synchronization
Active Device
Management IP
Passive Device
Management IP
Subnet Mask
Chapter 35 Device HA
DESCRIPTION
Select this to turn the Zyxel Device's Device HA Pro feature on.
Select this to have a passive Zyxel Device copy the active Zyxel Device's
configuration, signatures (anti-virus, IDP/application patrol, and system protect),
and certificates.
Note: Only Zyxel Devices of the same model and firmware version can
synchronize.
Type the serial number of the Zyxel Device (active or passive) with the Device HA Pro
subscribed license.
Type the IPv4 address of the highest-numbered port on the active Zyxel Device (the
heartbeat dedicated link port).
Type the IPv4 address of the highest-numbered port on the passive Zyxel Device (the
heartbeat dedicated link port).
Note: The active and passive Zyxel Device Management IP addresses must
be in the same subnet.
Type the subnet mask for the management IP addresses.
ZyWALL USG Series User's Guide
679