Geo Ip Summary Screen - ZyXEL Communications ZyWall ATP series User Manual

Table 262 IPv4/IPv6 Address Group Configuration > Add (continued)
LABEL
Address Type
Member List
OK
Cancel

34.6.4 Geo IP Summary Screen

Use this screen to update the database of country-to-IP address mappings and manually configure
custom country-to-IP address mappings in geographic address objects. You can then use geographic
address objects in security policies to forward or deny traffic to whole countries or regions.
Click a column's heading cell to sort the table entries by that column's criteria. Click the heading cell
again to reverse the sort order.
Figure 407 Configuration > Object > Address/Geo IP > Geo IP
Chapter 34 Object
DESCRIPTION
Select the type of address you want to create.
Note: The Zyxel Device automatically updates address objects that are based on an
interface's IP address, subnet, or gateway if the interface's IP address settings
change. For example, if you change 1's IP address, the Zyxel Device
automatically updates the corresponding interface-based, LAN subnet
address object.
The Member list displays the names of the address and address group objects that have been
added to the address group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key to
select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Note: You cannot mix FQDN objects with other objects in an FQDN group.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
ZyWALL ATP Series User's Guide
626