ZyXEL Communications ZyWall ATP series User Manual page 122

Figure 100 Monitor > System Status > Traffic Statistics
There is a limit on the number of records shown in the report. Please see
information. The following table describes the labels in this screen.
Table 29 Monitor > System Status > Traffic Statistics
LABEL DESCRIPTION
Data Collection
Collect Statistics Select this to have the Zyxel Device collect data for the report. If the Zyxel Device has already
been collecting data, the collection period displays to the right. The progress is not tracked
here real-time, but you can click the Refresh button to update it.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Statistics
Interface Select the interface from which to collect information. You can collect information from
Ethernet, VLAN, bridge and PPPoE/PPTP interfaces.
Sort By Select the type of report to display. Choices are:
• Host IP Address/User - displays the IP addresses or users with the most traffic and how much
traffic has been sent to and from each one.
• Service/Port - displays the most-used protocols or service ports and the amount of traffic for
each one.
• Web Site Hits - displays the most-visited Web sites and how many times each one has been
visited.
• Country - displays the countries with the most traffic and the amount of traffic for each
one.
Each type of report has different information in the report (below).
Refresh Click this button to update the report display.
Flush Data Click this button to discard all of the screen's statistics and update the report display.
These fields are available when the Traffic Type is Host IP Address/User.
# This field is the rank of each record. The IP addresses and users are sorted by the amount of
traffic.
Direction This field indicates whether the IP address or user is sending or receiving traffic.
• Ingress- traffic is coming from the IP address or user to the Zyxel Device.
• Egress - traffic is going from the Zyxel Device to the IP address or user.
IP Address/ This field displays the IP address or user in this record. The maximum number of IP addresses or
User
users in this report is indicated in
Amount This field displays how much traffic was sent or received from the indicated IP address or user. If
the Direction is Ingress, a red bar is displayed; if the Direction is Egress, a blue bar is displayed.
The unit of measure is bytes, Kbytes, Mbytes or Gbytes, depending on the amount of traffic for
the particular IP address or user. The count starts over at zero if the number of bytes passes the
byte count limit. See
Chapter 6 Monitor
Table 30 on page
Table 30 on page 123.
ZyWALL ATP Series User's Guide
122
Table 30 on page 123
123.
for more