ZyXEL Communications ZyWall ATP series User Manual page 191

Each field is described in the following table.
Table 79 Configuration > Wireless > AP Management > AP Group
LABEL DESCRIPTION
Group Setting
Default Group Select a group that is used as the default group.
Any AP that is not configured to associate with a specific AP group belongs to the default
group automatically.
Group Summary
Add Click this button to create a new AP group.
Edit Select an entry and click this button to edit its properties.
Remove Select an entry and click this button to remove it from the list.
Note: You cannot remove a group with which an AP is associated.
DCS Now Select one or multiple groups and click this button to use DCS (Dynamic Channel Selection)
to allow the APs in the group(s) to automatically find a less-used channel in an environment
where there are many APs and there may be interference.
Note: You should have enabled DCS in the applied AP radio profile before the
Note: DCS is not supported on the radio which is working in repeater AP mode.
# This is the index number of the group in the list.
Group Name This is the name of the group.
Member Count This is the total number of APs which belong to this group.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Chapter 8 Wireless
APs can use DCS.
ZyWALL ATP Series User's Guide
191