ZyXEL Communications ZyWall ATP series User Manual page 813

The Zyxel Device's traffic throughput rate decreased after I started collecting traffic statistics.
Data collection may decrease the Zyxel Device's traffic throughput rate.
I can only see newer logs. Older logs are missing.
When a log reaches the maximum number of log messages, new log messages automatically overwrite
existing log messages, starting with the oldest existing log message first.
The commands in my configuration file or shell script are not working properly.
• In a configuration file or shell script, use "#" or "!" as the first character of a command line to have the
Zyxel Device treat the line as a comment.
• Your configuration files or shell scripts can use "exit" or a command line consisting of a single "!" to
have the Zyxel Device exit sub command mode.
• Include write commands in your scripts. Otherwise the changes will be lost when the Zyxel Device
restarts. You could use multiple write commands in a long script.
Note: "exit" or "!'" must follow sub commands if it is to make the Zyxel Device exit sub
command mode.
See Chapter 39 on page 762
I cannot get the firmware uploaded using the commands.
The Web Configurator is the recommended method for uploading firmware. You only need to use the
command line interface if you need to recover the firmware. See the CLI Reference Guide for how to
determine if you need to recover the firmware and how to recover it.
My packet capture captured less than I wanted or failed.
The packet capture screen's File Size sets a maximum size limit for the total combined size of all the
capture files on the Zyxel Device, including any existing capture files and any new capture files you
generate. If you have existing capture files you may need to set this size larger or delete existing capture
files.
The Zyxel Device stops the capture and generates the capture file when either the capture files reach
the File Size or the time period specified in the Duration field expires.
Chapter 43 Troubleshooting
for more on configuration files and shell scripts.
ZyWALL ATP Series User's Guide
813