ZyXEL Communications ZyWall ATP series User Manual page 123

Table 29 Monitor > System Status > Traffic Statistics (continued)
LABEL DESCRIPTION
These fields are available when the Traffic Type is Service/Port.
# This field is the rank of each record. The protocols and service ports are sorted by the amount
of traffic.
Service/Port This field displays the service and port in this record. The maximum number of services and
service ports in this report is indicated in
Protocol This field indicates what protocol the service was using.
Direction This field indicates whether the indicated protocol or service port is sending or receiving traffic.
• Ingress - traffic is coming into the Zyxel Devicethrough the interface
• Egress - traffic is going out from the Zyxel Device through the interface
Amount This field displays how much traffic was sent or received from the indicated service / port. If the
Direction is Ingress, a red bar is displayed; if the Direction is Egress, a blue bar is displayed. The
unit of measure is bytes, Kbytes, Mbytes, Gbytes, or Tbytes, depending on the amount of traffic
for the particular protocol or service port. The count starts over at zero if the number of bytes
passes the byte count limit. See
These fields are available when the Traffic Type is Web Site Hits.
# This field is the rank of each record. The domain names are sorted by the number of hits.
Web Site This field displays the domain names most often visited. The Zyxel Device counts each page
viewed on a Web site as another hit. The maximum number of domain names in this report is
indicated in
Hits This field displays how many hits the Web site received. The Zyxel Device counts hits by
counting HTTP GET packets. Many Web sites have HTTP GET references to other Web sites, and
the Zyxel Device counts these as hits too. The count starts over at zero if the number of hits
passes the hit count limit. See
These fields are available when the Traffic Type is Country.
# This field is the rank of each record. The country name is sorted by the amount of traffic.
Direction This field indicates whether the indicated protocol or service port is sending or receiving traffic.
• Ingress - traffic is coming into the Zyxel Devicethrough the interface
• Egress - traffic is going out from the Zyxel Device through the interface
Country This field displays the name of the country.
Name
Country This field displays the country code.
Amount This field displays how much traffic was sent or received from the indicated country. If the
Direction is Ingress, a red bar is displayed; if the Direction is Egress, a blue bar is displayed. The
unit of measure is bytes, Kbytes, Mbytes, Gbytes, or Tbytes, depending on the amount of traffic
for the particular protocol or service port. The count starts over at zero if the number of bytes
passes the byte count limit. See
• Ingress - traffic is coming into the Zyxel Device from the country.
• Egress - traffic is going from the Zyxel Device to the country.
The following table displays the maximum number of records shown in the report, the byte count limit,
and the hit count limit.
Table 30 Maximum Values for Reports
LABEL
Maximum Number of Records
Byte Count Limit
Hit Count Limit
Chapter 6 Monitor
Table 30 on page
Table 30 on page
Table 30 on page 123.
Table 30 on page
Table 30 on page
DESCRIPTION
20
64
2 bytes; this is just less than 17 million terabytes.
64
2 hits; this is over 1.8 x 10
ZyWALL ATP Series User's Guide
123
123.
123.
123.
123.
19
hits.