Ipnp Screen - ZyXEL Communications ZyWall ATP series User Manual

19.2 IPnP Screen

This screen allows you to enable IPnP on the Zyxel Device and specific internal interface(s). To access
this screen click Configuration > Network > IPnP.
Figure 265 Configuration > Network > IPnP
The following table describes the labels in this screen.
Table 153 Configuration > Network > IPnP
LABEL
Enable IPnP
Member List
Apply
Reset
Chapter 19 IPnP
DESCRIPTION
Select this option to turn on the IPnP feature on the Zyxel Device.
Note: You can enable this feature only when the security policy is enabled.
The Available list displays the name(s) of the internal interface(s) on which you can enable
IPnP.
To enable IPnP on an interface, you can double-click a single entry to move it or use the [Shift]
or [Ctrl] key to select multiple entries and click the right arrow button to add to the Member list.
To remove an interface, select the name(s) in the Member list and click the left arrow button.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
ZyWALL ATP Series User's Guide
378