ZyXEL Communications ZyWall ATP series User Manual page 194

Table 80 Configuration > Wireless > AP Management > AP Group > Add/Edit (continued)
LABEL DESCRIPTION
# This is the index number of the SSID profile. You can associate up to eight SSID profiles with
an AP radio.
SSID Profile Indicates which SSID profile is associated with this radio profile.
VLAN Settings
Force Overwrite Select this to have the Zyxel Device change the AP's management VLAN to match the
VLAN Config configuration in this screen.
Management VLAN Enter a VLAN ID for this AP.
ID
As Native VLAN Select this option to treat this VLAN ID as a VLAN created on the Zyxel Device and not one
assigned to it from outside the network.
Port Settings
Model Specific Select the model of the managed AP to display the model-specific port and VLAN settings
Setting in the tables below.
Port Setting You can activate or deactivate a non-uplink port.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
Activate/Inactivate To turn on an entry, select it and click Activate. To turn off an entry, select it and click
Inactivate.
# This is the port's index number in this list.
Status This displays whether or not the port is activated.
Port This shows the name of the physical Ethernet port on the managed AP.
PVID This shows the port's PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port
so that the frames are forwarded to the VLAN group that the tag defines.
VLAN Configuration Use Add to create a new VLAN Configuration. Select a VLAN Configuration first to use the
Edit, Remove, Activate and Inactivate buttons.
# This is the VLAN's index number in this list.
Status This displays whether or not the VLAN is activated.
Name This shows the name of the VLAN.
VID This shows the VLAN ID number.
Member This field displays the Ethernet port(s) that is a member of this VLAN.
Load Balancing
Setting
Enable Load Select this to enable load balancing on the Zyxel Device.
Balancing
Use this section to configure wireless network traffic load balancing between the managed
APs in this group.
Note: Load balancing is not supported on the radio which is working in root AP or
Chapter 8 Wireless
repeater AP mode.
ZyWALL ATP Series User's Guide
194