ZyXEL Communications ZyWall ATP series User Manual page 611

Table 250 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL
Management
Frame Protection
OK
Cancel
34.3.2.5 MAC Filter List
This screen allows you to create and manage security configurations that can be used by your SSIDs. To
access this screen click Configuration > Object > AP Profile > SSID > MAC Filter List.
Note: You can have a maximum of 32 MAC filtering profiles on the Zyxel Device.
Figure 395 Configuration > Object > AP Profile > SSID > MAC Filter List
The following table describes the labels in this screen.
Table 251 Configuration > Object > AP Profile > SSID > MAC Filter List
LABEL
Add
Edit
Remove
References
#
Profile Name
Filter Action
Chapter 34 Object
DESCRIPTION
This field is available only when you select wpa2 or wpa2-mix in the Security Mode field and
set Cipher Type to aes.
Data frames in 802.11 WLANs can be encrypted and authenticated with WEP, WPA or
WPA2. But 802.11 management frames, such as beacon/probe response, association
request, association response, de-authentication and disassociation are always
unauthenticated and unencrypted. IEEE 802.11w Protected Management Frames allows
APs to use the existing security mechanisms (encryption and authentication methods
defined in IEEE 802.11i WPA/WPA2) to protect management frames. This helps prevent
wireless DoS attacks.
Select the check box to enable management frame protection (MFP) to add security to
802.11 management frames.
Select Optional if you do not require the wireless clients to support MFP. Management
frames will be encrypted if the clients support MFP.
Select Required and wireless clients must support MFP in order to join the AP's wireless
network.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to add a new MAC filtering profile.
Click this to edit the selected MAC filtering profile.
Click this to remove the selected MAC filtering profile.
Click this to view which other objects are linked to the selected MAC filtering profile (for
example, SSID profile).
This field is a sequential value, and it is not associated with a specific profile.
This field indicates the name assigned to the MAC filtering profile.
This field indicates this profile's filter action (if any).
ZyWALL ATP Series User's Guide
611