Date And Time - ZyXEL Communications ZyWall ATP series User Manual

Click Configuration > System > USB Storage to open the screen as shown next.
Figure 456 Configuration > System > USB Storage
The following table describes the labels in this screen.
Table 300 Configuration > System > USB Storage
LABEL
Activate USB
storage service
Disk full warning
when remaining
space is less than
Apply
Reset

37.4 Date and Time

For effective scheduling and logging, the Zyxel Device system time must be accurate. The Zyxel
Device's Real Time Chip (RTC) keeps track of the time and date. There is also a software mechanism to
set the time manually or get the current time and date from an external server.
To change your Zyxel Device's time based on your local time zone and date, click Configuration >
System > Date/Time. The screen displays as shown. You can manually set the Zyxel Device's time and
date or have the Zyxel Device get the date and time from a time server.
Chapter 37 System
DESCRIPTION
Select this if you want to use the connected USB device(s).
Set a number and select a unit (MB or %) to have the Zyxel Device send a warning message
when the remaining USB storage space is less than the value you set here.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
ZyWALL ATP Series User's Guide
691