ZyXEL Communications ZyWall ATP series User Manual page 438

Chapter 23 BWM (Bandwidth Management)
Table 178 Configuration > BWM > Create New Object > Add User
LABEL
Password
Retype
Description
Authentication Timeout
Settings
Lease Time
Reauthentication Time
OK
Cancel
DESCRIPTION
Type a password for the user object. The password can consist of alphanumeric
characters, the underscore, and some punctuation marks (+-/*= :; .! @$&%#~ ' \ () ),
and it can be up to eight characters long.
Retype the password to confirm.
Enter a description for this user object. It is not used elsewhere. You can use
alphanumeric and ()+/:=?!*#@$_%- characters, and it can be up to 60
characters long.
Choose either Use Default setting option, which shows the default Lease Time of
1,440 minutes and Reauthentication Time of 1,440 minutes or you can enter them
manually by choosing Use Manual Settings option.
This shows the Lease Time setting for the user, by default it is 1,440 minutes.
This shows the Reauthentication Time for the user, by default it is 1,440 minutes.
Click OK to save the setting.
Click Cancel to abandon this screen.
ZyWALL ATP Series User's Guide
438