Configuring A Tunnel - ZyXEL Communications 310 User Manual

Vpn firewall

Hide thumbs Also See for 310:

Table of Contents

Chapter 7 Interfaces

Figure 89 6to4 Tunnel

7.6.1 Configuring a Tunnel

This screen lists the ZyWALL's configured tunnel interfaces. To access this screen, click Network >

Interface > Tunnel.

Figure 90 Network > Interface > Tunnel

Each field is explained in the following table.

Table 50 Network > Interface > Tunnel

Object References

Click this to create a new GRE tunnel interface.

Double-click an entry or select it and click Edit to open a screen where you can modify

the entry's settings.

To remove an entry, select it and click Remove. The ZyWALL confirms you want to

remove it before doing so.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

Select an entry and click Object Reference to open a screen that shows which

settings use the entry. See

This field is a sequential value, and it is not associated with any interface.

Section 7.3.2 on page 122

ZyWALL 110/310/1100 Series User's Guide

for an example.

Show Quick Links

Table of Contents