White List Screen - ZyXEL Communications ZyWall ATP series User Manual

Figure 257 Configuration > Network > Layer 2 Isolation
The following table describes the labels in this screen.
Table 147 Configuration > Network > Layer 2 Isolation
LABEL
Enable Layer2
Isolation
Member List
Apply
Reset

17.3 White List Screen

IP addresses that are not listed in the white list are blocked from communicating with other devices in
the layer-2-isolation-enabled internal interface(s) except for broadcast packets.
To access this screen click Configuration > Network > Layer 2 Isolation > White List.
Chapter 17 Layer 2 Isolation
DESCRIPTION
Select this option to turn on the layer-2 isolation feature on the Zyxel Device.
Note: You can enable this feature only when the security policy is enabled.
The Available list displays the name(s) of the internal interface(s) on which you can enable
layer-2 isolation.
To enable layer-2 isolation on an interface, you can double-click a single entry to move it or use
the [Shift] or [Ctrl] key to select multiple entries and click the right arrow button to add to the
Member list. To remove an interface, select the name(s) in the Member list and click the left
arrow button.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
ZyWALL ATP Series User's Guide
368