User/Group Setting Screen - ZyXEL Communications ZyWall ATP series User Manual

The following table describes the labels in this screen.
Table 238 Configuration > Object > User/Group > Group > Add
LABEL
Name
Description
Member List
OK
Cancel

34.2.4 User/Group Setting Screen

The Setting screen controls default settings, login settings, lockout settings, and other user settings for the
Zyxel Device. You can also use this screen to specify when users must log in to the Zyxel Device before it
routes traffic for them.
To access this screen, login to the Web Configurator, and click Configuration > Object > User/Group >
Setting.
Chapter 34 Object
DESCRIPTION
Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is case-
_
sensitive. User group names have to be different than user names.
Enter the description of the user group, if any. You can use up to 60 characters, punctuation
marks, and spaces.
The Member list displays the names of the users and user groups that have been added to the
user group. The order of members is not important. Select users and groups from the Available
list that you want to be members of this group and move them to the Member list. You can
double-click a single entry to move it or use the [Shift] or [Ctrl] key to select multiple entries and
use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
ZyWALL ATP Series User's Guide
589