ZyXEL Communications ZyWall ATP series User Manual page 325

Figure 222 Scenario 1: CE Router - to - MPLS
10.8.4.2 CE - PE Configuration Process
The process for configuring BGP in this scenario is:
Configure the AS number for BGP on the Zyxel Device (CE) in Configuration > Network > Routing > BGP.
1
Note: The
Zyxel Device can only belong to one AS at a time.
Configure the AS number and BGP criteria of the peer BGP routers (PE) in the neighboring AS in
2
Configuration > Network > Routing > BGP > Add Neighbors.
Note: The maximum number of neighboring BGP routers supported by the Zyxel Device is 5.
Configure the network for BGP routes in the neighboring AS.
3
Note: You may configure up to 16 network routes.
Chapter 10 Routing
ZyWALL ATP Series User's Guide
325