ZyXEL Communications ZyWall ATP series User Manual page 39

Table 6 Monitor Menu Screens Summary (continued)
FOLDER OR LINK TAB
Log View Log
View AP Log
Configuration Menu
Use the configuration menu screens to configure the Zyxel Device's features.
Table 7 Configuration Menu Screens Summary
FOLDER OR LINK TAB
Quick Setup
Licensing
Registration Registration
Service
Signature Signature
Update
Wireless
Controller Configuration
AP Mgnt AP List
Management
AP Policy
AP Group
Firmware
MON Profile Rogue/Friendly AP
List
Auto Healing Auto Healing
RTLS Real Time Location
System
Network
Interface Port Role
Ethernet
PPP
Cellular
Tunnel
VLAN
Bridge
VTI
Trunk
Chapter 1 Introduction
FUNCTION
Lists log entries.
Lists AP log entries.
FUNCTION
Quickly configure WAN interfaces or VPN connections.
Register the device and activate trial services.
View the licensed service status and upgrade licensed services.
Update signatures immediately or by a schedule.
Configure manual or automatic controller registration.
Edit or remove entries in the lists of APs managed by the Zyxel Device.
Configure the AP controller's IP address on the managed APs and
determine the action the managed APs take if the current AP
controller fails.
Create groups of APs, define their radio, VLAN, port and load
balancing settings.
Update the firmware on APs connected to your Zyxel Device.
Configure how the Zyxel Device monitors rogue APs.
Enable auto healing to extend the wireless service coverage area of
the managed APs when one of the APs fails.
Use the managed APs as part of an Ekahau RTLS to track the location
of Ekahau Wi-Fi tags.
Use this screen to set the Zyxel Device's flexible ports such as LAN, OPT,
WLAN, or DMZ.
Manage Ethernet interfaces and virtual Ethernet interfaces.
Create and manage PPPoE and PPTP interfaces.
Configure a cellular Internet connection for an installed mobile
broadband card.
Configure tunneling between IPv4 and IPv6 networks.
Create and manage VLAN interfaces and virtual VLAN interfaces.
Create and manage bridges and virtual bridge interfaces.
Configure IP address assignment and interface parameters for VTI
(Virtual Tunnel Interface).
Create and manage trunks (groups of interfaces) for load balancing.
ZyWALL ATP Series User's Guide
39