Monitor; Chapter 6 Monitor; Overview; What You Can Do In This Chapter - ZyXEL Communications ZyWall ATP series User Manual

6.1 Overview

Use the Monitor screens to check status and statistics information.

6.1.1 What You Can Do in this Chapter

Use the Monitor screens for the following.
• Use the System Status > Port Statistics screen (see
for each physical port.
• Use the System Status > Port Statistics > Graph View screen (see
line graph of packet statistics for each physical port.
• Use the System Status > Interface Status screen
Device's interfaces and their packet statistics.
• Use the System Status > Traffic Statistics screen (see
collection and view statistics.
• Use the System Status > Session Monitor screen (see
or service.
• Use the System Status > IGMP Statistics screen (see
details.
• Use the System Status > DDNS Status screen (see
Zyxel Device's DDNS domain names.
• Use the System Status > IP/MAC Binding screen
have received an IP address from Zyxel Device interfaces with IP/MAC binding enabled.
• Use the System Status > Login Users screen
currently logged into the Zyxel Device.
• Use the System Status > Cellular Status screen
broadband connection status.
• Use the System Status > UPnP Port Status screen (see
NAT port mapping rules that UPnP creates on the Zyxel Device.
• Use the System Status > USB Storage screen
connected USB storage device.
• Use the System Status > Ethernet Neighbor screen
the Zyxel Device's neighboring devices via Layer Link Discovery Protocol (LLDP).
• Use the System Status > FQDN Object screen
domain name (FQDN) object cache lists used in DNS queries.
• Use the Wireless > AP Information > AP List screen
currently connected to the Zyxel Device.
• Use the Wireless > AP Information > Radio List screen
about the wireless radio transmitters in each of the APs connected to the Zyxel Device.
Section 6.2 on page
(Section 6.3 on page
Section 6.7 on page
Section 6.8 on page
(Section 6.9 on page
(Section 6.6 on page
(Section 6.10 on page
(Section 6.12 on page
(Section 6.13 on page
(Section 6.14 on page
(Section 6.15 on page
ZyWALL ATP Series User's Guide
114
C
H A P T E R

Monitor

116) to look at packet statistics
Section 6.2 on page
118) to see all of the Zyxel
Section 6.4 on page 121) to start or stop data
Section 6.5 on page 124) to view sessions by user
127) to view multicasting
128) to view the status of the
128) to view a list of devices that
126) to look at a list of the users
129) to check your mobile
Section 6.11 on page 133) to look at a list of the
134) to view information about a
135) to view and manage
136) to display fully qualified
138) to display which APs are
(Section 6.16 on page
6
116) to look at a
145) to display statistics