ZyXEL Communications ZyWall ATP series User Manual page 581

Table 232 Configuration > Object > Zone (continued)
LABEL
References
#
Name
Member
Reference
34.1.2.1 Zone Edit
The Zone Edit screen allows you to add or edit a zone. To access this screen, go to the Zone screen (see
Section 34.8.2 on page
Figure 377 Configuration > Object > Zone > Add
The following table describes the labels in this screen.
Table 233 Configuration > Object > Zone > Add/Edit
LABEL
Name
Member List
OK
Cancel
Chapter 34 Object
DESCRIPTION
Select an entry and click References to open a screen that shows which settings use the
entry. Click Refresh to update information in this screen.
This field is a sequential value, and it is not associated with any interface.
This field displays the name of the zone.
This field displays the names of the interfaces that belong to each zone.
This field displays the number of times an Object Reference is used in a policy.
633), and click the Add icon or an Edit icon.
DESCRIPTION
For a system default zone, the name is read only.
For a user-configured zone, type the name used to refer to the zone. You may use 1-31
alphanumeric characters, underscores (
a number. This value is case-sensitive.
Available lists the interfaces and VPN tunnels that do not belong to any zone. Select the
interfaces and VPN tunnels that you want to add to the zone you are editing, and click the
right arrow button to add them.
Member lists the interfaces and VPN tunnels that belong to the zone. Select any interfaces
that you want to remove from the zone, and click the left arrow button to remove them.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
ZyWALL ATP Series User's Guide
581
), or dashes (-), but the first character cannot be
_