The Port Statistics Screen - ZyXEL Communications ZyWall ATP series User Manual

Table of Contents

Advertisement

6.2 The Port Statistics Screen

Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen, click
Monitor > System Status > Port Statistics.
Figure 97 Monitor > System Status > Port Statistics
The following table describes the labels in this screen.
Table 26 Monitor > System Status > Port Statistics
LABEL
Poll Interval
Set Interval
Stop
Switch to Graphic
View
#
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Chapter 6 Monitor
DESCRIPTION
Enter how often you want this window to be updated automatically, and click Set Interval.
Click this to set the Poll Interval the screen uses.
Click this to stop the window from updating automatically. You can start it again by setting the
Poll Interval and clicking Set Interval.
Click this to display the port statistics as a line graph.
This field is a sequential value, and it is not associated with a specific port.
This field displays the physical port number.
This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed and duplex
setting (Full or Half).
This field displays the number of packets transmitted from the Zyxel Device on the physical port
since it was last connected.
This field displays the number of packets received by the Zyxel Device on the physical port
since it was last connected.
This field displays the number of collisions on the physical port since it was last connected.
This field displays the transmission speed, in bytes per second, on the physical port in the one-
second interval before the screen updated.
This field displays the reception speed, in bytes per second, on the physical port in the one-
second interval before the screen updated.
This field displays how long the physical port has been connected.
This field displays how long the Zyxel Device has been running since it last restarted or was
turned on.
ZyWALL ATP Series User's Guide
116

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atp500Atp200Atp800

Table of Contents