ZyXEL Communications ZyWall ATP series User Manual page 157

Each field is described in the following table.
Table 56 Monitor > VPN Monitor > IPSec
LABEL
Name
Policy
Search
Disconnect
Connection Check
#
Serial Number
System Name
Name
Policy
My Address
Secure Gateway
Up Time
Timeout
Inbound (Bytes)
Outbound (Bytes)
Regular Expressions in Searching IPSec SAs
A question mark (?) lets a single character in the VPN connection or policy name vary. For example, use
"a?c" (without the quotation marks) to specify abc, acc and so on.
Wildcards (*) let multiple VPN connection or policy names match the pattern. For example, use "*abc"
(without the quotation marks) to specify any VPN connection or policy name that ends with "abc". A
VPN connection named "testabc" would match. There could be any number (of any type) of
characters in front of the "abc" at the end and the VPN connection or policy name would still match. A
VPN connection or policy name named "testacc" for example would not match.
A * in the middle of a VPN connection or policy name has the Zyxel Device check the beginning and
end and ignore the middle. For example, with "abc*123", any VPN connection or policy name starting
with "abc" and ending in "123" matches, no matter how many characters are in between.
The whole VPN connection or policy name has to match if you do not use a question mark or asterisk.
Chapter 6 Monitor
DESCRIPTION
Type the name of a IPSec SA here and click Search to find it (if it is associated). You
can use a keyword or regular expression. Use up to 30 alphanumeric and _+-
.()!$*^:?|{}[]<>/ characters. See
Type the IP address(es) or names of the local and remote policies for an IPSec SA
and click Search to find it. You can use a keyword or regular expression. Use up to 30
alphanumeric and _+-.()!$*^:?|{}[]<>/ characters. See
more details.
Click this button to search for an IPSec SA that matches the information you
specified above.
Select an IPSec SA and click this button to disconnect it.
Select an IPSec SA and click this button to check the connection.
This field is a sequential value, and it is not associated with a specific SA.
This field displays the serial number of this Zyxel Device.
This field displays the name used to identify the Zyxel Device.
This field displays the name of the IPSec SA.
This field displays the content of the local and remote policies for this IPSec SA. The IP
addresses, not the address objects, are displayed.
This field displays the IP address of local computer.
This field displays the secure gateway information.
This field displays how many seconds the IPSec SA has been active. This field displays
N/A if the IPSec SA uses manual keys.
This field displays how many seconds remain in the SA life time, before the Zyxel
Device automatically disconnects the IPSec SA. This field displays N/A if the IPSec SA
uses manual keys.
This field displays the amount of traffic that has gone through the IPSec SA from the
remote IPSec router to the Zyxel Device since the IPSec SA was established.
This field displays the amount of traffic that has gone through the IPSec SA from the
Zyxel Device to the remote IPSec router since the IPSec SA was established.
ZyWALL ATP Series User's Guide
157
Section on page 157 for more details.
Section on page 157 for