The Redirect Service Edit Screen - ZyXEL Communications ZyWall ATP series User Manual

Table 139 Configuration > Network > Redirect Service (continued)
LABEL
Status
Service
Name
User/Group
Interface
Source Address
Server
Port
Apply
Reset

13.2.1 The Redirect Service Edit Screen

Click Network > Redirect Service to open the Redirect Service screen. Then click the Add or Edit icon to
open the Redirect Service Edit screen where you can configure the rule.
Figure 235 Network > Redirect Service > Edit
Chapter 13 Redirect Service
DESCRIPTION
This icon is lit when the entry is active and dimmed when the entry is inactive.
This is the name of the service: HTTP or SMTP.
This is the descriptive name of a rule.
This is the user account or user group name to which this rule is applied.
This is the interface on which the request must be received.
This is the name of the source IP address object from which the traffic should be sent. If any
displays, the rule is effective for every source.
This is the IP address of the HTTP proxy server or the SMTP server to which the matched traffic
is forwarded.
This is the service port number used by the HTTP proxy server or SMTP server.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
ZyWALL ATP Series User's Guide
344