ZyXEL Communications ZyWall ATP series User Manual page 625

Table 261 Configuration > Object > Address/Geo IP > Address Group (continued)
LABEL
Add
Edit
Remove
References
#
Name
Description
Reference
34.6.3.1 Address Group Add/Edit Screen
The Address Group Add/Edit screen allows you to create a new address group or edit an existing one. To
access this screen, go to the Address Group screen (see
the Add icon or an Edit icon in the IPv4 Address Group Configuration or IPv6 Address Group
Configuration section.
Figure 406 IPv4/IPv6 Address Group Configuration > Add
The following table describes the labels in this screen.
Table 262 IPv4/IPv6 Address Group Configuration > Add
LABEL
Name
Description
Chapter 34 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Select an entry and click References to open a screen that shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific address group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
This displays the number of times an object reference is used in a profile.
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is case-
_
sensitive.
This field displays the description of each address group, if any. You can use up to 60
characters, punctuation marks, and spaces.
ZyWALL ATP Series User's Guide
625
Section 34.6.3 on page 624), and click either