The Ssl Access Privilege Policy Add/Edit Screen - ZyXEL Communications ZyWall ATP series User Manual

The following table describes the labels in this screen.
Table 165 VPN > SSL VPN > Access Privilege
LABEL
Access Policy
Summary
Add
Edit
Remove
Activate
Inactivate
Move
References
#
Status
Name
User/Group
Access Policy
Summary
Apply
Reset

21.2.1 The SSL Access Privilege Policy Add/Edit Screen

To create a new or edit an existing SSL access policy, click the Add or Edit icon in the Access Privilege
screen.
Chapter 21 SSL VPN
DESCRIPTION
This screen shows a summary of SSL VPN policies created.
Click on the VPN icon to go to the Zyxel VPN Client product page at the Zyxel website.
Click this to create a new entry. Select an entry and click Add to create a new entry after the
selected entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the entry's
settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it
before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To move an entry to a different number in the list, click the Move icon. In the field that appears,
specify the number to which you want to move the interface.
Select an entry and click References to open a screen that shows which settings use the entry.
Click Refresh to update information on this screen.
This field displays the index number of the entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This field displays the descriptive name of the SSL access policy for identification purposes.
This field displays the user account or user group name(s) associated to an SSL access policy.
This field displays up to three names.
This field displays details about the SSL application object this policy uses including its name, type,
and address.
Click Apply to save the settings.
Click Reset to discard all changes.
ZyWALL ATP Series User's Guide
417