What You Can Do In This Chapter; Before You Begin; Configuring Rtls - ZyXEL Communications USG40 User Manual

9.6.1 What You Can Do in this Chapter

Use the RTLS screen
RTLS (Real Time Location Service) to track the location of Ekahau Wi-Fi tags.

9.6.2 Before You Begin

You need:
• At least three APs managed by the ZyWALL/USG (the more APs the better since it increases the
amount of information the Ekahau RTLS Controller has for calculating the location of the tags)
• IP addresses for the Ekahau Wi-Fi tags
• A dedicated RTLS SSID is recommended
• Ekahau RTLS Controller in blink mode with TZSP Updater enabled
• Security policies to allow RTLS traffic if the ZyWALL/USG security policy control is enabled or the
Ekahau RTLS Controller is behind a firewall.
For example, if the Ekahau RTLS Controller is behind a firewall, open ports 8550, 8553, and 8569 to
allow traffic the APs send to reach the Ekahau RTLS Controller.
The following table lists default port numbers and types of packets RTLS uses.
Table 93 RTLS Traffic Port Numbers
PORT NUMBER
8548
8549
8550
8552
8553
8554
8560
8562
8569

9.6.3 Configuring RTLS

Click Configuration > Wireless > RTLS to open this screen. Use this screen to turn RTLS (Real
Time Location System) on or off and specify the IP address and server port of the Ekahau RTLS
Controller.
Chapter 9 Wireless
(Section 9.6.3 on page
TYPE DESCRIPTION
TCP Ekahau T201 location update.
UDP Ekahau T201 location update.
TCP Ekahau T201 tag maintenance protocol and Ekahau RTLS Controller user
interface.
UDP Ekahau Location Protocol
UDP Ekahau Maintenance Protocol
UDP Ekahau T301 firmware update.
TCP Ekahau Vision web interface
UDP Ekahau T301W firmware update.
UDP Ekahau TZSP Listener Port
ZyWALL/USG Series User's Guide
257
257) to use the managed APs as part of an Ekahau