ZyXEL Communications ZyWall ATP series User Manual page 635

The following table describes the labels in this screen.
Table 270 Configuration > Object > Schedule > Edit (One Time)
LABEL
Configuration
Name
Day Time
StartDate
StartTime
StopDate
StopTime
OK
Cancel
34.8.2.2 The Recurring Schedule Add/Edit Screen
The Recurring Schedule Add/Edit screen allows you to define a recurring schedule or edit an existing
one. To access this screen, go to the Schedule screen (see
the Add icon or an Edit icon in the Recurring section.
Figure 415 Configuration > Object > Schedule > Edit (Recurring)
Chapter 34 Object
DESCRIPTION
Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
Specify the year, month, and day when the schedule begins.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule begins.
• Hour - 0 - 23
• Minute - 0 - 59
Specify the year, month, and day when the schedule ends.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule ends.
• Hour - 0 - 23
• Minute - 0 - 59
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
ZyWALL ATP Series User's Guide
635
Section 34.8.2 on page 633), and click either