24.2.1.3 Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the settings for the RADIUS
server. Then, set up the authentication method, and configure the Zyxel Device to use the
authentication method. Finally, force users to log into the Zyxel Device before it routes traffic for them.
Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry. Configure the RADIUS
1
server's address, authentication port (1812 if you were not told otherwise), and key. Click OK.
Figure 310 Configuration > Object > AAA Server > RADIUS > Add
Click Configuration > Object > Auth. Method. Double-click the default entry. Click the Add icon. Select
2
group radius because the Zyxel Device should use the specified RADIUS server for authentication. Click
OK.
Figure 311 Configuration > Object > Auth. method > Edit
Click Configuration > Web Authentication. In the Web Authentication > General screen, select Enable
3
Web Authentication to turn on the web authentication feature and click Apply.
Chapter 24 Web Authentication
ZyWALL ATP Series User's Guide
449