ZyXEL Communications ZyWall ATP series User Manual page 498

Figure 338 Configuration > Security Service > App Patrol
The following table describes the labels in this screen.
Table 201 Configuration > Security Service > App Patrol
LABEL DESCRIPTION
Add Click this to create a new entry. Select an entry and click Add to create a new entry after the
selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
Remove Select an entry and click Remove to delete the selected entry.
References Select an entry and click References to open a screen that shows which settings use the entry.
Click Refresh to update information on this screen.
# This field is a sequential value showing the number of the profile. The profile order is not
important.
Name This displays the name of the profile created.
Description This displays the description of the App Patrol Profile.
Scan Option This field displays the scan options from the App Patrol profile.
Reference This displays the number of times an object reference is used in a profile.
Action Click this icon to apply the entry to a security policy.
Go to the Configuration > Security Policy > Policy Control screen to check the result.
Signature The following fields display information on the current signature set that the Zyxel Device is
Information using.
Current Version This field displays the App Patrol signature set version number. This number gets larger as the set
is enhanced.
Signature This field displays the number of IDP signatures in this set. This number usually gets larger as the
Number set is enhanced. Older signatures and rules may be removed if they are no longer applicable
or have been supplanted by newer ones.
Released Date This field displays the date and time the set was released.
Update Click this link to go to the screen you can use to download signatures from the update server.
Signatures
Chapter 26 Application Patrol
ZyWALL ATP Series User's Guide
498