Ip/Mac Binding Exempt List - ZyXEL Communications ZyWall ATP series User Manual

16.3 IP/MAC Binding Exempt List

Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC Binding Exempt List
screen. Use this screen to configure ranges of IP addresses to which the Zyxel Device does not apply IP/
MAC binding.
Figure 255 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 146 Configuration > Network > IP/MAC Binding > Exempt List
LABEL
Add
Edit
Remove
#
Name
Start IP
End IP
Add icon
Apply
Chapter 16 IP/MAC Binding
DESCRIPTION
Click this to create a new entry.
Click an entry or select it and click Edit to modify the entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it
before doing so.
This is the index number of the IP/MAC binding list entry.
Enter a name to help identify this entry.
Enter the first IP address in a range of IP addresses for which the Zyxel Device does not apply IP/
MAC binding.
Enter the last IP address in a range of IP addresses for which the Zyxel Device does not apply IP/
MAC binding.
Click the Add icon to add a new entry.
Click the Remove icon to delete an entry. A window displays asking you to confirm that you want
to delete it.
Click Apply to save your changes back to the Zyxel Device.
ZyWALL ATP Series User's Guide
366