The Botnet Filter Screen - ZyXEL Communications ZyWall ATP series User Manual

6.33 The Botnet Filter Screen

Click Monitor > Security Statistics > Botnet Filter to display the following screen. This screen displays anti-
botnet statistics.
Figure 140 Monitor > Security Statistics > Botnet Filter
The following table describes the labels in this screen.
Table 65 Monitor > Security Statistics > Botnet Filter
LABEL
Collect Statistics
Apply
Reset
Refresh
Flush Data
IP Scanned
IP Hit Count
URL Scanned
URL Hit Count
Time
Source IP
Botnet IP
Botnet URL
Threat Category
Chapter 6 Monitor
DESCRIPTION
Select this check box to have the Zyxel Device collect anti-botnet statistics.
The collection starting time displays after you click Apply. All of the statistics in this screen
are for the time period starting at the time displayed here. The format is year, month, day
and hour, minute, second. All of the statistics are erased if you restart the Zyxel Device or
click Flush Data. Collecting starts over and a new collection start time displays.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
Click this button to update the report display.
Click this button to discard all of the screen's statistics and update the report display.
This field displays the total number of the IP addresses that are scanned.
This field displays the total number of the hit counts on the scanned IP addresses.
This field displays the total number of the URLs that are scanned.
This field displays the total number of the hit counts on the scanned URLs.
This field displays the date and time the entry was created.
This field displays the source IP address of traffic that you want to trace.
This field displays the IP address of a botnet command and control (C&C) server.
This field displays the URL of an infected website or a botnet C&C server.
This field displays the category of the entry.
ZyWALL ATP Series User's Guide
170