ZyXEL Communications ZyWall ATP series User Manual page 440

Chapter 23 BWM (Bandwidth Management)
Figure 302 Configuration > BWM > Create New Object > Add Address
The following table describes the fields in the above screen.
Table 180 Configuration > BWM > Create New Object > Add Address
LABEL
Name
Address Type
IP Address
OK
Cancel
DESCRIPTION
Enter a name for the Address object of the rule.
Select an Address Type from the drop down menu on the right. The Address Types
are Host, Range, Subnet, Interface IP, Interface Subnet, and Interface Gateway.
Enter an IP address for the Address object.
Click OK to save the setting.
Click Cancel to abandon the setting.
ZyWALL ATP Series User's Guide
440