The Service Group Summary Screen - ZyXEL Communications ZyWall ATP series User Manual

34.7.3 The Service Group Summary Screen

The Service Group summary screen provides a summary of all service groups. In addition, this screen
allows you to add, edit, and remove service groups.
To access this screen, log in to the Web Configurator, and click Configuration > Object > Service >
Service Group.
Figure 411 Configuration > Object > Service > Service Group
The following table describes the labels in this screen. See
information as well.
Table 267 Configuration > Object > Service > Service Group
LABEL
Add
Edit
Remove
References
#
Family
Name
Description
Reference
Chapter 34 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Select an entry and click References to open a screen that shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific service group.
This field displays the Server Group supported type, which is according to your configurations in
the Service Group Add/Edit screen.
There are 3 types of families:
• : Supports IPv4 only
• : Supports IPv6 only
• : Supports both IPv4 and IPv6
This field displays the name of each service group.
By default, the Zyxel Device uses services starting with "Default_Allow_" in the security policies
to allow certain services to connect to the Zyxel Device.
This field displays the description of each service group, if any.
This displays the number of times an object reference is used in a profile.
ZyWALL ATP Series User's Guide
631
Section 34.7.3.1 on page 632 for more