The Packet Capture Screen - ZyXEL Communications ZyWall ATP series User Manual

Table 346 Maintenance > Diagnostics > Files (continued)
LABEL
File Name
Size
Last Modified

40.3 The Packet Capture Screen

Use this screen to capture network traffic going through the Zyxel Device's interfaces. Studying these
packet captures may help you identify network problems. Click Maintenance > Diagnostics > Packet
Capture to open the packet capture screen.
Note: New capture files overwrite existing files of the same name. Change the File Suffix field's
setting to avoid this.
Figure 540 Maintenance > Diagnostics > Packet Capture
The following table describes the labels in this screen.
Table 347 Maintenance > Diagnostics > Packet Capture
LABEL
Interfaces
IP Version
Chapter 40 Diagnostics
DESCRIPTION
This column displays the label that identifies the file.
This column displays the size (in bytes) of a file.
This column displays the date and time that the individual files were saved.
DESCRIPTION
Enabled interfaces (except for virtual interfaces) appear under Available Interfaces.
Select interfaces for which to capture packets and click the right arrow button to move
them to the Capture Interfaces list. Use the [Shift] and/or [Ctrl] key to select multiple
objects.
Select the version of IP for which to capture packets. Select any to capture packets for
all IP versions.
ZyWALL ATP Series User's Guide
781