ZyXEL Communications ZyWall ATP series User Manual page 672

The following table describes the labels in this screen.
Table 290 Configuration > Object > DHCPv6 > Request
LABEL
Configuration
Add
Edit
Remove
References
#
Name
Type
Interface
Value
34.13.1.1 DHCPv6 Request Add/Edit Screen
The Request Add/Edit screen allows you to create a new request object or edit an existing one.
To access this screen, go to the Request screen (see
Add icon or an Edit icon.
Figure 442 Configuration > DHCPv6 > Request > Add
The following table describes the labels in this screen.
Table 291 Configuration > DHCPv6 > Request > Add
LABEL
Name
Request Type
Interface
OK
Cancel
Chapter 34 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Select an entry and click References to open a screen that shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific object.
This field displays the name of each request object.
This field displays the request type of each request object.
This field displays the interface used for each request object.
This field displays the value for each request object.
DESCRIPTION
Type the name for this request object. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is case-
_
sensitive.
Select the request type for this request object. You can choose from Prefix Delegation, DNS
Server, NTP Server, or SIP Server.
Select the interface for this request object.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
ZyWALL ATP Series User's Guide
Section 34.13.1 on page
672
671), and click either the