The Session Control Screen - ZyXEL Communications ZyWall ATP series User Manual

Table 195 Configuration > Security Policy > ADP > Profile > Add-Protocol-Anomaly
LABEL
Log
Action
OK
Cancel
Save

25.6 The Session Control Screen

Click Configuration > Security Policy > Session Control to display the Security Policy Session Control
screen. Use this screen to limit the number of concurrent NAT/Security Policy sessions a client can use.
You can apply a default limit for all users and individual limits for specific users, addresses, or both. The
individual limit takes priority if you apply both.
Figure 334 Configuration > Security Policy > Session Control
Chapter 25 Security Policy
DESCRIPTION
These are the log options. To edit this, select an item and use the Log icon.
This is the action the Zyxel Device should take when a packet matches a policy. To
edit this, select an item and use the Action icon.
Click OK to save your settings to the Zyxel Device, complete the profile and return to
the profile summary page.
Click Cancel to return to the profile summary page without saving any changes.
Click Save to save the configuration to the Zyxel Device but remain in the same
page. You may then go to the another profile screen (tab) in order to complete the
profile. Click OK in the final profile screen to complete the profile.
ZyWALL ATP Series User's Guide
491