The Dhcpv6 Lease Screen - ZyXEL Communications ZyWall ATP series User Manual

34.13.2 The DHCPv6 Lease Screen

The Lease screen allows you to add, edit, and remove DHCPv6 lease type objects. To access this screen,
login to the Web Configurator, and click Configuration > Object > DHCPv6 > Lease.
Figure 443 Configuration > Object > DHCPv6 > Lease
The following table describes the labels in this screen.
Table 292 Configuration > Object > DHCPv6 > Lease
LABEL
Configuration
Add
Edit
Remove
References
#
Name
Type
Interface
Value
34.13.2.1 DHCPv6 Lease Add/Edit Screen
The Lease Add/Edit screen allows you to create a new lease object or edit an existing one.
To access this screen, go to the Lease screen (see
Add icon or an Edit icon.
Figure 444 Configuration > DHCPv6 > Lease > Add
Chapter 34 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Select an entry and click References to open a screen that shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific object.
This field displays the name of each lease object.
This field displays the request type of each lease object.
This field displays the interface used for each lease object.
This field displays the value for each lease object.
ZyWALL ATP Series User's Guide
673
Section 34.13.2 on page 673), and click either the