Vlan Summary Screen - ZyXEL Communications ZyWall ATP series User Manual

• Better manageability - You can align network policies more appropriately for users. For example, you
can create different content filtering rules for each VLAN (each department in the example above),
and you can set different bandwidth limits for each VLAN. These rules are also independent of the
physical network, so you can change the physical network without changing policies.
In this example, the new switch handles the following types of traffic:
• Inside VLAN 2.
• Between the router and VLAN 1.
• Between the router and VLAN 2.
• Between the router and VLAN 3.
VLAN Interfaces Overview
In the Zyxel Device, each VLAN is called a VLAN interface. As a router, the Zyxel Device routes traffic
between VLAN interfaces, but it does not route traffic within a VLAN interface. All traffic for each VLAN
interface can go through only one Ethernet interface, though each Ethernet interface can have one or
more VLAN interfaces.
Note: Each VLAN interface is created on top of only one Ethernet interface.
Otherwise, VLAN interfaces are similar to other interfaces in many ways. They have an IP address, subnet
mask, and gateway used to make routing decisions. They restrict bandwidth and packet size. They can
provide DHCP services, and they can verify the gateway is available.

9.7.1 VLAN Summary Screen

This screen lists every VLAN interface and virtual interface created on top of VLAN interfaces. If you
enabled IPv6 in the Configuration > System > IPv6 screen, you can also configure VLAN interfaces used
for your IPv6 networks on this screen. To access this screen, click Configuration > Network > Interface >
VLAN.
Figure 190 Configuration > Network > Interface > VLAN
Chapter 9 Interfaces
ZyWALL ATP Series User's Guide
257