Add/Edit Dhcpv6 Request/Release Options - ZyXEL Communications ZyWall ATP series User Manual

Figure 174 References
The following table describes labels that can appear in this screen.
Table 94 References
LABEL
Name
#
Service
Priority
Name
Description
Refresh
Cancel

9.3.5 Add/Edit DHCPv6 Request/Release Options

When you configure an interface as a DHCPv6 server or client, you can additionally add DHCPv6
request or lease options which have the Zyxel Device to add more information in the DHCPv6 packets.
To open the screen, click Configuration > Network > Interface > Ethernet > Edit, select DHCPv6 Server or
DHCPv6 Client in the DHCPv6 Setting section, and then click Add in the DHCPv6 Request Options or
DHCPv6 Lease Options table.
Figure 175 Configuration > Network > Interface > Ethernet > Edit > Add DHCPv6 Request/Lease Options
Select a DHCPv6 request or lease object in the Select one object field and click OK to save it. Click
Cancel to exit without saving the setting.
Chapter 9 Interfaces
DESCRIPTION
This identifies the object for which the configuration settings that use it are displayed. Click the
object's name to display the object's configuration screen in the main window.
This field is a sequential value, and it is not associated with any entry.
This is the type of setting that references the selected object. Click a service's name to display
the service's configuration screen in the main window.
If it is applicable, this field lists the referencing configuration item's position in its list, otherwise
N/A displays.
This field identifies the configuration item that references the object.
If the referencing configuration item has a description configured, it displays here.
Click this to update the information in this screen.
Click Cancel to close the screen.
ZyWALL ATP Series User's Guide
231