Schedule Overview - ZyXEL Communications ZyWall ATP series User Manual

34.7.3.1 The Service Group Add/Edit Screen
The Service Group Add/Edit screen allows you to create a new service group or edit an existing one. To
access this screen, go to the Service Group screen (see
Add icon or an Edit icon.
Figure 412 Configuration > Object > Service > Service Group > Edit
The following table describes the labels in this screen.
Table 268 Configuration > Object > Service > Service Group > Edit
LABEL
Name
Description
Configuration
OK
Cancel

34.8 Schedule Overview

Use schedules to set up one-time and recurring schedules for policy routes, security policies, application
patrol, and content filtering. The Zyxel Device supports one-time and recurring schedules. One-time
schedules are effective only once, while recurring schedules usually repeat. Both types of schedules are
based on the current date and time in the Zyxel Device.
Note: Schedules are based on the Zyxel Device's current date and time.
Chapter 34 Object
DESCRIPTION
Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is case-
_
sensitive.
Enter a description of the service group, if any. You can use up to 60 printable ASCII characters.
The Member list displays the names of the service and service group objects that have been
added to the service group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key to
select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
ZyWALL ATP Series User's Guide
Section 34.7.3 on page
632
631), and click either the