The Network Tool Screen - ZyXEL Communications ZyWall ATP series User Manual

Table 351 Maintenance > Diagnostics > Remote Assistance (continued)
LABEL
Password
SSH Port
HTTPS Port
IP Address1
IP Address2
Schedule
Name
Start Date
Start Time
Stop Date
Stop Time
Apply
Reset

40.7 The Network Tool Screen

Use this screen to perform various network tests.
Click Maintenance > Diagnostics > Network Tool to display this screen.
Figure 546 Maintenance > Diagnostics > Network Tool
Chapter 40 Diagnostics
DESCRIPTION
Type a password for the selected user/group to allow external access.
This field displays the SSH port number for external access. It should be the same port
number as the one configured in Configuration > System > SSH.
This field displays the HTTPS port number for external access. It should be the same port
number as the one configured in Configuration > System > WWW > Service Control.
Enter the public IP address of the external user that is allowed to access the Zyxel Device
remotely.
Enter the public IP address of the external user that is allowed to access the Zyxel Device
remotely.
This field displays the name of the schedule for allowed external access. The schedule
must be first configured in Object > Schedule.
This field displays the date on which the schedule begins.
This field displays the time at which the schedule begins.
This field displays the date on which the schedule ends.
This field displays the time at which the schedule ends.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
ZyWALL ATP Series User's Guide
788