Radius Server Summary - ZyXEL Communications ZyWall ATP series User Manual

Table 275 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add (continued)
LABEL
Configuration
Validation
OK
Cancel

34.9.6 RADIUS Server Summary

Use the RADIUS screen to manage the list of RADIUS servers the Zyxel Device can use in authenticating
users.
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen.
Figure 423 Configuration > Object > AAA Server > RADIUS
The following table describes the labels in this screen.
Table 276 Configuration > Object > AAA Server > RADIUS
LABEL
Add
Edit
Remove
References
#
Name
Server Address
34.9.6.1 Adding a RADIUS Server
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen. Click the Add icon or
an Edit icon to display the following screen. Use this screen to create a new AD or LDAP entry or edit an
existing one.
Chapter 34 Object
DESCRIPTION
Use a user account from the server specified above to test if the configuration is correct. Enter
the account's user name in the Username field and click Test.
Click OK to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Select an entry and click References to open a screen that shows which settings use the entry.
This field displays the index number.
This is the name of the RADIUS server entry.
This is the address of the AD or LDAP server.
ZyWALL ATP Series User's Guide
644