Internet Access: L2Tp - ZyXEL Communications ZyWall ATP series User Manual

Figure 26 Internet Access: PPTP Encapsulation

2.1.5 Internet Access: L2TP

2.1.5.1 ISP Parameters
• Authentication Type - Select an authentication protocol for outgoing connection requests. Options
are:
• Chap/PAP - Your Zyxel Device accepts either CHAP or PAP when requested by the remote node.
• Chap - Your Zyxel Device accepts CHAP only.
• PAP - Your Zyxel Device accepts PAP only.
• MSCHAP - Your Zyxel Device accepts MSCHAP only.
• MSCHAP-V2 - Your Zyxel Device accepts MSCHAP-V2 only.
• Type the User Name given to you by your ISP. You can use alphanumeric and -_@$./ characters, and
it can be up to 31 characters long.
• Type the Password associated with the user name. Use up to 64 ASCII characters except the [] and ?.
This field can be blank.
• Select Nailed-Up if you do not want the connection to time out. Otherwise, type the Idle Timeout in
seconds that elapses before the router automatically disconnects from the PPPoE server.
2.1.5.2 L2TP Configuration
• Base Interface: This identifies the Ethernet interface you configure to connect with a modem or router.
• Type a Base IP Address (static) assigned to you by your ISP.
Chapter 2 Initial Setup Wizard
ZyWALL ATP Series User's Guide
53