Port Statistics; Figure 10 Home > Show Statistics; Table 7 Home > Show Statistics - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 2 Introducing the Web Configurator
Table 6 Screens Summary (continued)
LINK
LOGS
MAINTENANCE
LOGOUT

2.4.6 Port Statistics

Click Port Statistics in the HOME screen. Read-only information here includes port status
and packet specific statistics. The Poll Interval(s) field is configurable.
Figure 10 HOME > Show Statistics
The following table describes the labels in this screen.
Table 7 HOME > Show Statistics
LABEL
Port
Status
TxPkts
62
TAB FUNCTION
View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your ZyWALL's log settings.
Reports Use this screen to have the ZyWALL record and display network
usage reports.
General This screen contains administrative.
Password Use this screen to change your password.
Time and Date Use this screen to change your ZyWALL's time and date.
Device Mode Use this screen to configure and have your ZyWALL work as a
router or a bridge.
F/W Upload Use this screen to upload firmware to your ZyWALL
Backup & Use this screen to backup and restore the configuration or reset
Restore the factory defaults to your ZyWALL.
Restart This screen allows you to reboot the ZyWALL without turning the
power off.
Click this label to exit the web configurator.
DESCRIPTION
These are the ZyWALL's interfaces.
For the WAN and dial backup ports, this displays the port speed and duplex setting
if you're using Ethernet encapsulation and Down (line is down), Idle (line (ppp)
idle), Dial (starting to trigger a call) or Drop (dropping a call) if you're using PPPoE
encapsulation. Dial backup is not available in bridge mode.
For the LAN, DMZ and WLAN ports, this displays the port speed and duplex setting.
This is the number of transmitted packets on this port.
ZyWALL 2 Plus User's Guide