ZyWALL 2 Plus User's Guide
14.6 Port Forwarding Screen
Note: If you do not assign a Default Server IP address, the ZyWALL discards all
packets received for ports that are not specified here or in the remote
management setup.
Click ADVANCED > NAT > Port Forwarding to open the Port Forwarding screen.
Refer to
Appendix E on page 541
Note: The last port forwarding rule is reserved for Roadrunner services. The rule is
activated only when you set the WAN Encapsulation to Ethernet and the
Service Type to something other than Standard.
Figure 128 Port Forwarding
260
for port numbers commonly used for particular services.
Chapter 14 Network Address Translation (NAT)