Command
Version 8.3.17.0
History
Example
Figure 11-26. show interfaces status Command Example
FTOS#show interface status
Port
Te 0/1
Te 0/2
Te 0/3
Te 0/4
Te 0/5
Te 0/6
Te 0/7
Te 0/8
Te 0/9
Te 0/10
Te 0/11
Te 0/12
Te 0/13
Te 0/14
Te 0/15
Te 0/16
FTOS#
show interfaces switchport
Displays only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2
mode interfaces' IEEE 802.1Q tag status and VLAN membership.
Syntax
show interfaces switchport [ interface | stack-unit unit-id ]
Parameters
interface
stack-unit
unit-id
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.17.0
History
Supported on M I/O Aggregator
Description
Status Speed
Down
Auto
Down
Auto
Down
Auto
Down
Auto
Down
Auto
Down
Auto
Down
Auto
Up
10000 Mbit Full
Down
Auto
Down
Auto
Down
Auto
Down
Auto
Down
Auto
Down
Auto
Down
Auto
Up
10000 Mbit Full
Enter one of the following keywords and slot/port or number information:
•
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
•
Enter the keyword
(OPTIONAL) Enter the keyword
Range: 0 to 5
Supported on M I/O Aggregator
Duplex Vlan
Auto
--
Auto
--
Auto
--
Auto
--
Auto
--
Auto
--
Auto
--
--
Auto
--
Auto
--
Auto
--
Auto
--
Auto
--
Auto
--
Auto
--
--
backup
to view the backup interface for this interface.
stack-unit
followed by the stack member number.
TenGigabitEthernet
Interfaces | 151