Debug Ip Bgp Dampening - Dell C9000 Series Reference Manual

Version Platform Support
7.8.1.0 S-Series (MBGP for IPv4 Multicast Only)
8.2.1.0 E-Series ExaScale (MBGP)

debug ip bgp dampening

View information on routes being dampened.
C9000 Series
Syntax
debug ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6
unicast] dampening
To disable debugging, use the no debug ip bgp dampening command.
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
b
Version
9.9(0.0)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
Enter the keyword vrf followed by the name of the VRF to view
information on dampened routes corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view dampened-route information related only
to ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view dampened-route information related only
to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to view dampened-route information related only to
ipv6 unicast routes.
Description
Introduced on the C9010.
Introduced on the S6000–ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Border Gateway Protocol 544