Appendix D - IETF RADIUS Attributes Support
Remote Authentication Dial-In User Service (RADIUS) attributes carry specific authentication,
authorization, information and configuration details for the request and reply. This appendix lists the
RADIUS attributes currently supported by the switch.
RADIUS attributes are supported by the IETF standard and Vendor-Specific Attribute (VSA). VSA
allows the vendor to create an additionally owned RADIUS attribute. For more information about D-
Link VSA, refer to the RADIUS Attributes Assignment Appendix.
IETF standard RADIUS attributes are defined in the RFC 2865 Remote Authentication Dial-In User
Service (RADIUS), RFC 2866 RADIUS Accounting, RFC 2868 RADIUS Attributes for Tunnel Protocol
Support, and RFC 2869 RADIUS Extensions.
The following table lists the IETF RADIUS attributes supported by the D-Link switch.
RADIUS Authentication Attributes:
Number
1
2
18
24
26
27
29
64
65
79
80
81
DXS-1210 Series Smart Managed Switch CLI Reference Guide
IETF Attribute
User-Name
User-Password
Reply-Message
State
Vendor-Specific
Session-Timeout
Termination-Action
Tunnel-Type
Tunnel-Medium-Type
EAP-Message
Message-Authenticator
Tunnel-Private-Group-ID
390